/ Pockels cell drivers for OEM and stand alone application
/ Wide variety of crystal heaters up to 200 C
/ Powering and cooling systems for pulsed lasers and systems
/ Compact pump chambers for Nd:YAG, glass and other active elements of your choice
/ Pulse repetition rate up to 100 kHz
/ Fast HV rise time <7 ns for 4 kV pulse
/ HV pulse amplitude up to 4 kV
/ Fast HV rise/fall time <4 – 8 ns
/ HV pulse amplitude up to 3.6 kV
/ Pulse repetition rate up to 3.5 MHz
/ Output pulse jitter < 50 ps if trigger pulse rise time < 0.5 ns
/ HV pulse amplitude up to 5.6 kV
/ HV repetition rate up to 10 kHz
/ HV pulse duration down to 15 ns
/ HV pulse amplitude doubling layout
/ Easy integration with HV power supply
/ For cavity dumping in mode-locked lasers
/ For cavity Q-switching in nanosecond lasers
/ Fast HV (less than 7 ns) edge ensures excellent pre- and post-pulse contrast
/ For Q-switching of lasers without use of phase retardation plate
/ Different versions tailored for specific applications
/ Designed for powering Pockels cell driver with appropriate power and voltage requirement
/ Tailored for OEM applications
/ HV power supply and low voltage 24 V DC power supply in one box
/ Tailored for use in laboratories
/ HV tuning by multi-turn knob
/ 3½ LCD display for voltage monitoring
/ Various versions for different power requirement
/ Best suited for OEM applications
/ Power factor correction
/ High reliability
/ ROHS compliant
/ Output power up to 3.2 kJ/s
/ Output voltage accuracy better than ±0.1 %
/ Output voltage up to 2500 V
/ Pulse repetition rate up to 150 Hz
/ Built-in serial ignition circuit
/ Built-in simmer power supply
/ Internal/external triggering
/ Remote control through LAN/CAN/RS-232 interface
/ Output voltage up to 2500 V
/ Single unit for oscillator-amplifier systems
/ Built-in serial ignition circuit
/ Built-in simmer power supply
/ 1 to 10 and more discharging channels with one charging channel
/ Output voltage up to 4000 V
/ Output voltage regulation better than ±0.3%
/ Up to two discharge channels per one 19” case
/ Cooling capacity 0-5 kW (at temperature difference 10 °C)
/ PID controller based temperature regulation in range 15-35 °C, better than 0.1 °C stability
/ Controlled deionizer maintains constant coolant conductivity (preset in range 1..100 uS/cm)
/ Water-air cooling
/ Deionizer and particle filter included
/ Provides interlock signal on error
/ Manual temperature setting on front panel
/ Two FL type flashlamp for active element pumping
/ O-ring type seals for flashlamp and active element
/ Close coupling design for high pumping efficiency
/ FL-58 type flashlamps (5×58mm) for active element pumping
/ O-ring type seals for flashlamp and active element
/ Close coupling design for high pumping efficiency
/ Designed for 5–400 ps pulse duration range
/ 1064 nm or 532 nm wavelength, other wavelengths by request