PL2210 series

Diode Pumped picosecond kHz pulsed Nd:YAG Lasers

/  kHz range mode-locked lasers

 /  Up to 5 mJ

 /  20-80 ps pulses

 /  1-2 kHz pulse repetition rate

/  kHz range mode-locked lasers

 /  Up to 5 mJ

 /  20-80 ps pulses

 /  1-2 kHz pulse repetition rate

Warning: Invalid argument supplied for foreach() in /home/customer/www/ on line 495

Features & Applications


  • High pulse energy at kHz rates
  • Diode pumped solid state design
  • Air cooled – external water supply is not required
  • Turn-key operation
  • Low maintenance costs
  • Optional streak camera triggering pulse with <10 ps rms jitter
  • Remote control pad
  • PC control via USB with supplied LabVIEW™ drivers
  • Optional temperature stabilized second, third and fourth harmonic generators


  • Time resolved fluorescence, pump-probe spectroscopy
  • OPG/OPA/OPO pumping
  • Remote Laser Sensing
  • Other spectroscopic and nonlinear optics applications


PL2210 series diode-pumped, air-cooled, mode-locked Nd:YAG lasers provide picosecond pulses at a kilohertz pulse repetition rate. Short pulse duration, excellent pulse-to-pulse stability, superior beam quality makes PL2210 series diode pumped picosecond lasers well suited for many applications, including material processing, time-resolved spectroscopy, optical parametric generator pumping, and other tasks.

Flexible design

PL2210 series lasers offer a number of optional items that extend the capabilities of the laser. A pulse picker option allows control of the pulse repetition rate of the laser and operation in single-shot mode. The repetition rate and timing of pulses can be locked to an external RF source (with –PLL option) or other ultrafast laser system (with –FS option). The laser provides a triggering pulse for synchronization of the customer‘s equipment. A low jitter SYNC OUT pulse has a lead up to 500 ns that can be adjusted in ~0.25 ns steps from a PC. Up to 150 μs lead of triggering pulse is available as a PRETRIG option that is designed to provide precise, very low jitter trigger pulses for a streak camera. Custom-built models with higher pulse energy are available on request.

Built-in harmonic generators

Angle-tuned non-linear crystals mounted in temperature stabilized heaters are used for second, third and fourth high spectral purity harmonic generation.

Simple and convenient laser control

The laser can be controlled from a user-friendly remote control pad or USB interface. The remote pad allows easy control of all parameters and features. Alternatively, the laser can be controlled from a computer withsupplied software for a Windows™  operating system. LabVIEW™ drivers are supplied as well.

Available models

PL2210Up to 400 μJ, 25 ps pulses at an up to 2 kHz repetition rate
PL2210AUp to 900 μJ, 25 ps pulses at an up to 1 kHz repetition rate
PL2210Bup to 2.5 mJ energy at a 1 kHz repetition rate at 80 ps pulses
PL2210B-TRModel, in addition to a 1 kHz pulse train, has an output of 88 MHz pulse train with 5 W average power that can be used for pumping synchronously pumped OPOs
PL2210CUp to 5 mJ energy at a 1 kHz repetition rate at 80 ps pulses



Model PL2210 PL2210A PL2210B PL2210B-TRPL2210C
Main specifications 1)
Output energy
    at 1064 nm 0.4 mJ 0.9 mJ 2.5 mJ2.5 mJ at 1 kHz
5 W at 88 MHz
2.5 mJ / 5 mJ
    at 532 nm2)0.2 mJ 0.45 mJ 1.3 mJ1.3 mJ / 2.5 mJ
    at 355 nm3)0.11 mJ0.3 mJ0.8 mJ0.8 mJ / 1.3 mJ
    at 266 nm4)0.05 mJ0.15 mJ0.5 mJ0.5 mJ / 0.8 mJ
Pulse energy stability (Std. Dev)5)
    at 1064 nm 0.5 %
    at 532 nm0.8 %
    at 355 nm1 %
    at 266 nm2.5 %
Pulse duration (FWHM) 6)25±2 ps 25±2 ps 80±8 ps100±10 ps25±2 ps / 80±8 ps
Pulse duration stability 7)±1 ps ±1 ps ±3 ps±3 ps±1 ps / ±3 ps
Pulse repetition rate 8)1 or 2 kHz1 kHz1 kHz / 1 MHz1 kHz
Triggering modeinternal/external
Typical SYNC OUT pulse delay9) 10)-500...50 ns
SYNC OUT pulse jitter (Std. Dev)<0.1 ns rms
Spatial mode 11) TEM00
Beam divergence 12)<1.6 mrad
Beam diameter 13)~3 mm
Beam pointing stability 14)<30 μrad
Pre-pulse contrast>200:1
Polarizationlinear, >100:1
Physical characteristics
Laser head size (W × L × H) 15)456 × 1031 × 242 mm455 × 1235 × 242 mm
Power supply size (W × L × H)365 × 392 × 290 mm475 × 460 × 290 mm365 × 285 × 360 mm
Operating requirements
Water service not required, air cooled
Relative humidity 10 – 80 % (non condensing)
Ambient temperature 22 ± 2 °C
Power requirements100 – 240 V AC, single phase 50/60 Hz
Power consumption 16)<0.5 kW<1 kW<1 kW<2 kW<1.5 kW


1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.
2) For PL2210x-SH and PL22210x-SH/FH options. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
3) For PL2210x-TH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
4) For PL2210x-SH/FH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
5) Averaged from 300 pulses at 1 kHz pulse repetition rate.
6) Optional 80±8 ps duration.
7) Measured over 1 hour period when ambient temperature variation is less than ±2 °C.
8) Should be specified when ordering. Inquire for custom pulse repetition rates.
9) In respect to optical pulse. <10 ps rms jitter is provided with PRETRIG option.
10) SYNC OUT lead or delay can be adjusted with 0.25 ns steps in specified range.
11) Gaussian fit >90%.
12) Full angle measured at the 1/e² point at 1064 nm .
13) Beam diameter is measured at 1064 nm at the 1/e² point.
14) Rms value measured from 300 shots.
15) 455×1235×250 mm (W×L×H) laser head size might be required for some optional configurations.
16) At 1 kHz pulse repetition rate.


Option PRETRIG provides low jitter pulse for streak camera triggering  with lead/delay in -150…150 μs range and <10 ps rms jitter.

Option P80 provides 80±8 ps output pulse duration. Main specifications:

Model PL2210  PL2210A 
Pulse energy 1)0.7 mJ1.2 mJ
 Pulse duration (FWHM) <80 ps

*At 1064 nm

Option PC allows reduction of the pulse repetition rate of the PL2210 series laser by integer numbers. Single shot mode is also possible. In addition, the –PC option reduces the low-intensity quasi-CW background that is present at laser output at 1064 nm wavelength. Please note that the output of fundamental wavelength and harmonics will be reduced by approx. 20% with installation of the –PC option.

Performance & Drawings

Ordering information

PL2210 ordering information

PL2210 ordering information

Send request about PL2210